DC-UPS With Ultra Capacitors

In General

The DC-buffer module C-TEC works with Ultra-capacitors as energy storage inside the housing. In case of an interruption of the DC-supply, the energy of the Ultracapacitors is released. The load is energised from the buffer module, til it is discharged. The back-up time depends on the state of charge of the capacitors and on the discharge current.

Devices with an interface are programmable via Software (paraTEC).
For the IPC operation is a shutdown software (TECControl) available.


C-TEC-Reihe

Input DC / Output DC constant

C-TEC UL-Certification Source Image Input Voltage Output Voltage Output current/energy
1203 12 V DC 11,75 V DC 3 A / 500 J or 3 A / 1 kJ
2403 24 V DC 24 V DC 3 A / 500 J or 3 A / 1 kJ
2403K 24 V DC 24 V DC 3 A / 1 kJ
2403-1 of 24 V DC 24 V DC 3 A / 1 kJ
2405-5 24 V DC 24 V DC 5 A / 5 kJ
2408-20 24 V DC 24 V DC 8 A / 20 kJ
2410-1 24 V DC 24 V DC 10 A / 1 kJ
2410-10 24 V AC 24 V DC 10 A / 10 kJ
2420-8 24 V DC 24 V DC 20 A / 8 kJ
C-TEC P series

Input DC / Output DC ramps down

C-TEC UL-Certification Source Image Input Voltage Output Voltage Output current/energy
1225 P 12 V DC 12 V DC 25 A / 0,5 kJ
2425 P 24 V DC 24 V DC 25 A / 1,4 kJ
2440 P 24 V DC 24 V DC 40 A / 4 kJ
4815 P 48 V DC 48 V DC 15 A / 1,0 kJ
AC-C-TEC Series

Input AC / Output DC

AC-C-TEC UL-Certification Source Image Input Voltage Output Voltage Output current/energy
1203-1 115-230 V AC 12 V 3A / 1 kJ
2403-05 115-230 V AC 24 V 3 A / 0,5 kJ
2403-1 115-230 V AC 24 V 3 A / 1 kJ
2403-1-400 400 V AC 24 V 3 A / 1 kJ
2410-10 100 - 240 V AC 24 V 10 A / 10 kJ
2420-8 400 V AC 24 V 20 A / 8 kJ
Capacitor Extension Modules
CEM UL-Certification Source Image Voltage V Energy kJ Current A
CEM 1 24 V DC 1 kJ 3 A
CEM 2 24 V DC 2 kJ 3 A
CEM 8 24 V DC 8 kJ 20 A
CEM 16 24 V DC 16 kJ 20 A
CEM 12V06 12 V DC 0,6 kJ 3 A
CEM 12V12 24 V DC 1,23 kJ 3 A
Highlights
  • compact design, assembled in one housing
  • maintenance-free
  • deep discharge protection, thus unlimited storage possible
  • no gas emission, so the use in closed housings is possible
  • fast availability because of short recharge time after discharge
Back-up Times

Compared with normally used buffer modules with capacitors, higher back-up times can be obtained with the C-TEC. They can be .

 back-up time = energy
                        voltage x current

 with full load capacitors:

         50 s = 12000_____
                    24 V x 10 A